I have a 2007 schwinn whizzer that needs a few things, i was wondering if anyone could recommend what type of carburetor i should use to replace the old one, and where i could find and matching idler pulley. Thank you.
2007 schwinn whizzer
- Thread starter 2007 schwinn Whizzer
- Start date
If ya got a 2007 Whizzer engine then You'll want a 22mm carb
This carb says it's got a #100 main jet You'll want to use a #84 or #85
whizzercruzzerparts.com
This carb says it's got a #100 main jet You'll want to use a #84 or #85
22mm Carburetor - Whizzer Cruzzer Parts
This is a Chinese carburetor , 22 mm . I bought several to sell and I run one on my hot rod engine . You must have a 22 mm intake port for this to run properly . I believe it has a 100 main jet .
whizzercruzzerparts.com
Wrench (If you're still on here) or anyone, I have a 2007. whizzer Phantom II and have the same question about a carb. The site that is attached looks like it's gone. Do you have any suggestions about what/where to get one? Thanks for your help.
Post is 2 years old. Paul passed away more than a year ago and the final sale of items took place earlier this year. Jo lin from Taiwan (E-Crater) still has many parts but shipping adds quite a bit to the price.
my ebay
WC1 Manufacture in Taiwan made your 2007 Whizzer
You can order from them but It's gonna take a while and cost more because it's shipped from Taiwan
You can also find a wide selection of 22mm carbs on E Bay and Amazon
Maybe try search Whizzer Parts on E Bay
22mm may be the size the rest are but that’s way too big for that size motor. I’d go 19mm MAX. I think about 16-18mm is best. Far as which exact carb that’s up to your intake manifold bolt spacing and such. Pretty much you need a 19mm slide carb with the correct bolt spacing. Measure the original carb or intake and get the same.