1951 Safti-Cycle

[Gordy]

Messed around this eve thinking on a flywheel cover.... What I am doing will add a little bit of legitimacy and the engine will look a little more period correct as they used covers very similar on the originals engines of course...

I had this old Briggs kick start motor cover and pinion gear cover here.. So I am adapted it to the Honda motor..I think it will look great..I will paint it the same color as the tank tomorrow and then on Monday I will have my buddy that made my tank decals, make a miniature decal for the flywheel cover.. Should look cool..Or to me anyway..Thanks

Sorry I forgot to answer a previous question..I am going to try a 60T rear..Hope it works out fine..That was a suggestion by another member here..

Here's something I did a few days ago. I had a spare 5hp flywheel cover and saw that is almost fit perfectly. This is also on a GC190.

 

[Gordy]

Here is what I was doing today.. I got this windshield over at my Brothers as I mentioned.. I spent a few Hours wet sanding and polishing with the buffer and compound..It was pretty scratched up.. I made an aluminum plate for the bottom..I have some split collars to attach it to the handlebars.. But need to fabricate the mount system between those and the shield itself.. Not sure I am going to like it yet..But will have little invested in trying it.. And it is reversible of course..Here is a pic of it just sitting on there..It is not near as large on there as the pic shows..I think it is kinda like a optical illusion of the Camera..Kinda like holding a fish way in front of you for the pic..So the fish looks bigger..Trick camera angles,LOLThanks

I redid headlights on a Porsche boxter like that for a friend at one point. They wanted 800 bucks a piece for oem replacement lights. A quick sand woth increasing grit and 2K clear paint, and new LED bulbs they looked brand new.

 

[Carbineone]

It sometimes pays to do a little work than pay the price.

I had to do quite a bit of modifying to get the old vintage Briggs cover on though..That looks like a much better fit to begin with..

 

[Carbineone]

I did go ahead and make mounts for the visor today. I am still not sure on it. It is something that was period correct and sure could have been there..And was probably the Cool thing back then. But if I decide to take it off.. No big deal. A few minute job..

I think I may shorten it up a few inches if it does not grow on me enough.. It might look better shortened a few inches..I know I am the only one that has to like it or not.. Does not really matter otherwise.. But just cannot really decide..

I can see some advantage in it as far as safety in that it does give the little Bike a little more stance so drivers may see more easily..Today we need every advantage we can get,LOL

 

[Carbineone]

Well I went ahead and shortened the Shield 3.5 Inches this morning and decided I like it so it will stay.. If it had come to me more complete and had a visor originally..I sure would not have discarded it.. So there is probably not much more I will bother you with my crazy stuff. You are probably getting fatigued from my updates..LOL

Maybe some riding updates next spring..Thanks

 

[curtisfox]

Well I went ahead and shortened the Shield 3.5 Inches this morning and decided I like it so it will stay.. If it had come to me more complete and had a visor originally..I sure would not have discarded it.. So there is probably not much more I will bother you with my crazy stuff. You are probably getting fatigued from my updates..LOL

Maybe some riding updates next spring..Thanks

LOOKS KOOL! I like it..........Curt