So i just got my kit in the mail it is the bbr 80/66cc silver angle kit upon receiving my kit i had to assemble the top end and noticed my bottom base gasket was ripped i got a new one on the way but i was going to try to make a tempoary one to get my bike built and running what fel pro materal should i buy from the auto parts store or what could i do to be able to build and get my bike running before thw new gasket gets here
Please someone help
- Thread starter Huffydavidson937
- Start date
Take the old gasket to the auto parts store. One of the staff should be able to help you if they have something you can make a gasket out of.
My personal advice would be to be patient and wait on the new gasket.
My personal advice would be to be patient and wait on the new gasket.
Here ya go. I'll show ya what to buy and how to make gaskets the easy way
Gasket Making 101
Howzit Everyone, $SAVE MONEY$ Gaskets made easy. Don't reach for the razor blade. Grab your 8oz alignment tool (ball peen hammer) and tap it out, Lightly tap gasket around the edges. As you tap out the bolt holes (or punch) put bolts in to help keep gasket aligned. The 1/32" rubber fiber sheet...
motoredbikes.com
I ended up stopping by my local auto zone and picking up some fel pro and made a new gasket im going to build my bike tomorrow details coming soon
Doing things yourself instead of buying parts is what interests me about motorized bicycles. Great job !Here ya go. I'll show ya what to buy and how to make gaskets the easy way
Gasket Making 101
Howzit Everyone, $SAVE MONEY$ Gaskets made easy. Don't reach for the razor blade. Grab your 8oz alignment tool (ball peen hammer) and tap it out, Lightly tap gasket around the edges. As you tap out the bolt holes (or punch) put bolts in to help keep gasket aligned. The 1/32" rubber fiber sheet...