biknut
Well-Known Member
I just use them because they look better and don't scratch your paint. I always mount the CDI under the engine. I've never used a stock plug wire or cap.
New Cranbrook Build...
- Thread starter Otto
- Start date
I just use them because they look better and don't scratch your paint. I always mount the CDI under the engine. I've never used a stock plug wire or cap.
Otto
New Member
I just use them because they look better and don't scratch your paint. I always mount the CDI under the engine. I've never used a stock plug wire or cap.
Speaking of the plug wire/cap, I was watching a video about that, but it mentioned that the newer CDI units have a glued in wire that is not able to be unscrewed out of the housing. Do you know anything about that? Since I just received my kit, I am guessing this is one of the newer ones.
Thanks for your help,
biknut
Well-Known Member
I buy solid core wire by the foot, and NGK plug caps from Bates Discount Cycle #2, but any wire you buy from a auto supply will be fine.
http://www.bates2.net/
chainmaker
Well-Known Member
Hey Otto- Watch out these fun little machines are EXTREMELY addictive. You are in the correct place for help and mb info. Although Im not a 2 stroke guy anymore- here is a link to Al Fishermans pre-installation tips if I were building a 2 smoke again I would follow every bit of it. https://docs.google.com/document/d/1GcesQihc7-mm3hJGf7UPiqOaRXZ8ekUT99QUZq2qXXE/mobilebasic?pli=1