Looking for a wide pedal crank

[SD moto man]

My 4 stroke kit didn't come with the wide crank, so I need to buy one separately. I have a Felt Twin with an original one piece crank, I think that is the "American" type? I think the one on Bike Berry you have to buy an adapter for the kit, because it's a European size. I'm a little confused on what is going to fit my bike, what I need to buy, and where which is the best one to buy.

Any Suggestions?

 

[Velodrome]

Second from the bottem of the page... Spensive, but very VERY well done.http://phantom-bikes.com/shop/parts/custom-parts/ its whats going on my Felt Twin job. You need the bent arms from the "KIT" That being the kit that aparently neither you or I bought ! I had to order this just to get the crank arms. Bass/turds at BE.com wont sell the crank arms sepretly http://www.bicycle-engines.com/wide-crank-pedal-p-309.html?osCsid=thoumlmvo64p7jlvlm8pm5lnc5

 

[Velodrome]

Its nice as you use your stock parts even the stock sprocket if you want; but any one piece sproket will work with Johns ( Phantom ) wide crank. I got this "Sweetheart" of a sprocket on the "Bay" 36 toother. Fits a treat!

 

[SD moto man]

Yeah those parts are not cheap... I already ordered the kit from Bike engines with the bottom bracket conversion kit.

 

[chainmaker]

Best bet is a set of Whizzer cranks from Memory Lane Clessics they are nice re-chromed originals and around 70 bucks

 

[A Future Pilot]

Will that 1 piece to 3 piece converter work with a Schwinn Clairmont?

 

[MotorBicycleRacing]

Will that 1 piece to 3 piece converter work with a Schwinn Clairmont?

Yes, I have a Schwinn Jaguar using these adapters.

http://www.sickbikeparts.com/catalo...ucts_id=104&osCsid=rcr9afcaap8va43u6c0mivlhc3

 

[SD moto man]

I got this bb conversion kit and it fit nicely on my felt twin. I also bought the 3 piece crank because my kit didn't come with it. No complaints with either purchase, I just wish my expensive ezm kit would have included the 3 piece crank like the basic grubee kits.

http://www.bicycle-engines.com/wide-crank-conversion-p-295.html

 

[Venice Motor Bikes]

I just break out the torch & heat the crank arms & bend them to clear the sides of the engine... It looks & works great & saves lots of money on buying those extra (un needed) parts!

 

[d_gizzle]

Hey velodrome,still got that long "kit" shaft? I'm in need of one.

 

[DDbike]

I just break out the torch & heat the crank arms & bend them to clear the sides of the engine... It looks & works great & saves lots of money on buying those extra (un needed) parts!

that makes too much $ense