Reed valve assemply

DanielMaia

DanielMaia

New Member
Hi guys,

I searched the reed valve's, and encountered some results, and i wanted to know what is necessary to assembly a reed valve on these china girls..

I searched for reed valves on ebay, what do you think about this one?

I want a good and decent reed valve, price under 30, or 40$..

thank you guys
 
You will have to cut, chop, grind, and weld to attach a reed valve to the cylinder.
These engines are not factory designed to have one.
You will have to re-engineer the cylinder and intake port on the cylinder for it to work.
 
But i want a reed valve intake, for my own evil reasons.

When someone manufactures such a system, i'll beat a path to their door, and so will everyone else.

Fabian
 
Rich made one; he's got a photo of it, but so far he won't sell it to me - it's his prototype and he won't part with it.
I guess i'll have to wait, though it could be an eternally long wait.
Maybe someone else can have a go at making a viable reed valve intake system.

Fabian
 
Last edited:
On one of the forums I have seen where someone put a Puch reed valve cylinder, piston,head and reed valve setup on a HT base.
 
WOOT!

DSC01072.jpg
 
Fabian said:
Rich made one; he's got a photo of it, but so far he won't sell it to me - it's his prototype and he won't part with it.
I guess i'll have to wait, though it could be an eternally long wait.
Maybe someone else can have a go at making a viable reed valve intake system.

Fabian
Click to expand...

dude has no welder, it was painted, probably to hide the jbweld
 
it isnt cheap, but you too can have a hybrid chinese motor, and be on your way to breaking spokes and speed limits
 
You can place a reed valve in the intake, it doesn't have to be part of the jug itself.. Any reed is better than none.. Example: I had a 74 elsinore 125 honda.. A Piston port motor from the factory, if any of you can remember those bikes, they were blazing fast super screamers..But installed a (GP kit), which consisted of a 4petal reed cage in an intake manifold (common terminology) between the carb and intake port.. It works, lol! Widened the power band and gave a little more on top to boot! REED, IS GOOD!
 
I say let's do it. My Honda Runaway (Urban Express Deluxe) moped has a reed valve case and I certainly like the feel of the throttle response and whatnot. I'm sure the idle is smoother as well compared to my other mopeds and- obviously- my Chinagirl. Let's see some reed valve intakes behind the carb people. I think some are kicking around out there.. Just on the bikes of secret squirrel bastiges who won't share their secret sauce with us mortals..
 
So will the Puch cylinder, head and reed assy. actually fit the little china motors like the 80-er (66cc) RAW?!!
 
You must log in or register to reply here.
Back
Top