Wiring My Bike, no instructions to go by 47cc

A

Airbuzz

New Member
Most kind Forum members, I am already in debt to you for your gracious help in the past, again if you would be so kind to render your assistance.

The kit is from Zone 8 and I don’t have any wiring instructions.

Can someone tell me which wires go where?

-A Blue and a Yellow from the throttle/kill switch.

-A Green and a Black from the ignition.

_& a Blue, a White and a Black from the Engine.

Which goes to what?

Please See pics.

Thanks.
 

Attachments

  • IMG_3660r.jpg
    IMG_3660r.jpg
    119.3 KB · Views: 512
  • IMG_3661r.jpg
    IMG_3661r.jpg
    119.6 KB · Views: 547
From the motor, the blue goes to the green from the cdi and the black from the engine goes to the black from the cdi. The white from the engine, unless you are hooking the kill switch up should be capped so it doesn't short the engine. If you do attach the kill switch, the blue wire goes with the blue wires between the engine and the cdi, the yellow connects to the black wires. Most people don't connect the kill switch until the motor is running as it has been known to cause problems.
 
Howdy AB, welcome. These are 3 of the best guys I know but I don't get out much. (My rule of thumb is black to black then try again if it fails) Really, your in good hands and great advice. Great to see ya!
 
Last edited:
Thank you all very much. I'll be wiring it up this weekend and firing it up for the first time.

I'll let you know how it goes.

Thanks.

Airbuzz
 
You must log in or register to reply here.
Back
Top