What do you see in these Photos ?

[Wheel Rush]

I didn't find the results of this to humorous !
The only thing I changed in this communication was my name and the last name of Mark, I took out !


--- On Thu, 6/19/08, Wheel Rush wrote:

From: Wheel Rush
Subject: Re: Instruction and maintenance manual
To: [email protected]
Date: Thursday, June 19, 2008, 4:19 PM


As you said below, " the sprocket presses up againt the spokes", . . . I have a problem with the spokes driving the chain off of the sprocket. What to do ?

WR
----- Original Message -----
From: mark
To: WR
Sent: Tuesday, June 17, 2008 10:38 AM
Subject: Re: Instruction and maintenance manual


HEllo, both the rubber washers go together inside around the hub.the sprocket presses up againt the spokes

--- On Mon, 6/16/08,Wheel Rush wrote:

From: Wheel Rush
Subject: Instruction and maintenance manual
To: "KING'S MOTOR BIKES" <[email protected]>
Date: Monday, June 16, 2008, 7:01 PM


This might be why my rear tire is out of alignment ???

Ahh, . . Sorry to bore you with my profound gulability ! But, Can I fix this

slight wobble in my wheel from previous pressure against the spokes ??

 

[Bikeguy Joe]

What exactly are they trying to tell you?

It goes- sprocket, rubber, spokes, rubber, 2 or 3 pc. metal part, washers, nuts.

 

[Wheel Rush]

I hesitate to say, however the correction has been made but the damage, I'm afraid has been done, . .

Now to fix it, . . Got any ideas, I have a slight wobble in the rear wheel ?

 

[Bikeguy Joe]

You can true the wheel up with the spokes, or replace any badly bent spokes...cheap, easy.

 

[FileStyle]

depending on the severity of it , take rim to local bike shop for trueing or some guys do it themselves.

 

[Dave31]

I still don't understand, is a bent wheel that's making it wobble...or is your wheel bearing's that are loose...

 

[Wheel Rush]

Sorry fairracing31,

It was both first, "the wheel bearing", I am assuming that the dark nut capped before the pedal chain sprocket, going from inside to out is the wheel bearing, yes this was adjusted.

Then I discovered the wheel is out of true, . . which possibly was the reason it unwond the wheel bearing a little on the first run.

 

[Wheel Rush]

I was just at the hardware and their outa spoke wrenches, so I'll hunt around, but thanks much for your replie.