Super Bad!

[indian22]

Thanks I'll do just that. He missed out on several wheel orders from me and as a result both lofty us lost out. I consider his offerings 4 star in quality and price, though not inexpensive, they are quite reasonable. I wasn't aware he built tanks...good to know.

Rick C.

 

[truckd]

Looky! what I found for a quarter

 

[Greg58]

That company logo brings back memories, I worked at Kmart then Sears after the merger, 34-1/2 years between the two. That logo was from pre 1990.

 

[truckd]

That company logo brings back memories, I worked at Kmart then Sears after the merger, 34-1/2 years between the two. That logo was from pre 1990.

Brought back alot of Memories for me too the last time I bought anything at a Kmart was a Blk Huffy Beach Cruiser for $39.99

 

[Greg58]

After looking around a little I believe that logo is from the 60's.

 

[truckd]

Well I got this Idea from Jeff Wolf a couple years ago and had to incorporate it into the build. The threaded rod connected to the Clevis Joint is off a satellite dish I took off the roof, then I drilled out the Clevis joint with a 7/64" bit then tapped it out with a 8mmx1.25 tap, Brake arm was bent inside and out then welded where a shallow channel cut was made for the bends, Shimano CB E110 brake with a 40 t sprocket. Everything clears Everything well so far now to engineer a Chain tensioner ? was thinking of one of my Designs like this that I made for Ol' Blue HUMMMMM? (Last Pic)

 

[truckd]

Found this the other day pretty cool! and everything is in the tin can I am thinking late 50's early 60's 39c

 

[truckd]

Been busy building a couple of engines to help with the funding of Super Bad.

 

[truckd]

Little slow on the build but will get to it soon!

 

[truckd]

Got some engines built to help fund the build and also did a rebuild and update on a 17 yr. old engine for Curtis Fox I'll probably finish it tomorrow right now its mostly just test fitting

 

[curtisfox]

Got some engines built to help fund the build and also did a rebuild and update on a 17 yr. old engine for Curtis Fox I'll probably finish it tomorrow right now its mostly just test fitting

Can't wait, going to be fun build. That engine has been in my shed for ever, LOL............Curt

 

[truckd]

Can't wait, going to be fun build. That engine has been in my shed for ever, LOL............Curt

YEAH!! it was made in 9/10/2006 it's done and I am going to start a thread for you starting with the engine .

 

[truckd]

A little off subject but I just got this BTR Saddle from a Good Friend in Thailand , it's not leather but that keeps the cost down .

 

[curtisfox]

Like your seat, should look nice on the bike.......Curt