Sprocket fit over internal gear hub?

[Mo'Beffah]

I got an Electra Rat-Rod and i got a lot of work to do on it. Besides the frame alterations that I'm being forced to do, I'm wondering if the sprocket that comes with the china kit will fit over a hub that has three internal gears. I read somewhere that these kits dont fit any internal hub geared bikes. Is this true? Use spacers?9

 

[Bikeguy Joe]

If you grind out the sprocket it will fit, use a fly cutter or mill if you can.

 

[Venice Motor Bikes]

If you grind out the sprocket it will fit, use a fly cutter or mill if you can.

I once used a cutting torch & a rat tail file to make the center hole bigger.

 

[Rambler]

I used a dremel and like 4 grinding wheels to get the sprocket to fit over my coaster brake's dustcover.

 

[Humsuckler]

for a small enlargment sanding drums on a rotary too (like a dremel) work pretty good.

if you have to take that hole up to a 2" hole, well. your gona want to use some sort of cutter on a drill press or a hole saw or something because it would take you half a day to dremel it out!

 

[OilyDave]

I used a dremel tool with a grinding wheel as well to make the hole larger. A sharpie works well as a guide to mark and the tip of the Sharpie is approx. 1/16 of an inch wide as well.

GL