Specs for my Trek 930 mountain bike

GoldenMotor.com

Rusty_Nail

Active Member
Oct 11, 2019
214
72
28
44
Hey everyone, I'm not sure if this is the right place to post my bikes specs for the build I'm attempting, but here they are. I was trying to find where I can put it on my profile so for any questions etc I have everyone will know my bikes specs. If this is not in the right place, where can I post it on my profile? The attactched pic is the same bike but mine's just a darker blue so you guys have a visual too. Thanks!

Sizes Available: 16.5, 18, 20, 22"(measured center to center)
Weight: Frame, 5.12 lbs.; Fork 3.26 lbs.; Bike 29. lbs.
Frame: True Temper OX Comp triple butted Cro-moly tubing; Rock Shox Quadra 10 fork

Wheelbase -- 42 in.; 106.68 cm
Seat tube -- 19.5 in., 49.53 cm (actual, center to top)
Top tube -- 23 in.; 58.42 cm (effective)
Head angle -- 71 degrees
Seat angle -- 73.5 degrees
Chainstays -- 16.875 in.; 42.86 cm
Bottom bracket height -- 11.75 in.; 29.84 cm
Fork rake -- 1.5 in.; 3.81 cm
Trail --2.89

Wheels:
Hubs -- Shimano STX, quick release, 135-mm rear axle spacing
Spokes -- 32, 14-gauge DT stainless steel, 3 cross
Rims -- Matrix Single Track Comp
Tires -- Trek Control Track system, 26x2.1

Drivetrain:
Derailleurs -- Shimano STX, Shimano STX Rapid-Fire Plus shifters
Chain -- Shimano Hyperglide
Crankset -- Shimano STX, Shimano STX steel rings, 175 mm crankarms
Bottom bracket -- Shimano Cartridge
Freewheel -- Shimano 7-speed cassette

Components:
Brakes -- Shimano STX
Pedals -- Trek System 1; nylon clips, nylon straps
Headset -- Dia-Comp "Aheadset", 1 1/8 Oversize
Seatpost -- Trek System 1 6061 T6 alloy, 300 mm
Saddle -- Trek System 2 Gel
Bar/stem -- Trek System 2 6061 T6 alloy bars, Trek System 2 Cro-Moly 14 cm. stem, Trek System 1 Bar-Ends
 

Attachments