Purple mz65 from zeda

M

Mossy

Well-Known Member
Some bling that matches some other bling I've been saving..
 

Attachments

  • IMG_20230307_121936806_HDR.jpg
    IMG_20230307_121936806_HDR.jpg
    51.2 KB · Views: 136
  • IMG_20230307_121945649.jpg
    IMG_20230307_121945649.jpg
    54.2 KB · Views: 133
  • Screenshot_20230301-211101.png
    Screenshot_20230301-211101.png
    99.4 KB · Views: 145
And the oko 21mm to go with it... These came out same time last year... Different colored float bowls... 2 stroke power jet...
 

Attachments

  • Screenshot_20230326-171812.png
    Screenshot_20230326-171812.png
    169.4 KB · Views: 121
Mossy I run a similar pipe on all three of my bikes, I added a silencer and a second mounting bracket either on the silencer or near it. The bracket broke at the weld on the first pipe at about 100 miles, after adding a second bracket I haven’t had any problems.
 
Greg58 said:
Mossy I run a similar pipe on all three of my bikes, I added a silencer and a second mounting bracket either on the silencer or near it. The bracket broke at the weld on the first pipe at about 100 miles, after adding a second bracket I haven’t had any problems.
Click to expand...
It's stainless steel and really well made compared to the other ones... But will get extra braces... I have a Gatling gun exaust muffler also that matches... Bolts made from titanium are available... It's something I'm working on as a show bike for the sparkle parade with lights and totally overboard
 
A lot of digging around and found this
 

Attachments

  • Screenshot_20230403-142514.png
    Screenshot_20230403-142514.png
    205.4 KB · Views: 109
Clear fuel bowls to check the level and help tune... Then you put the metal one back on after
 

Attachments

  • Screenshot_20230403-142905.png
    Screenshot_20230403-142905.png
    106.8 KB · Views: 114
You must log in or register to reply here.
Back
Top