Pure Brilliance...

Mobius

New Member
I was browsing my local Craigslist and discovered something of sheer genius... Yes it will need a clutch or perhaps just be a pedal start but just the way the he has assembled this makes perfect sense.

maybe this is how I will do it

DSC01189.jpg
 
Not only no pedals, but are those foot pegs mounted by drilling through the small lower tubes behind the seat posts? Also, a quick release rear skewer.I see a good opportunity for structural failure. Put a freewheeling front sprocket, centrifugal clutch, and pedals, and then you have a better chance of a good outcome. Otherwise, I like it.
 
well I was meaning keep the pedals and for gods sake no drilling...

...actually now that I think of it I don't like it. you would never be able to stop pedaling.

Nevermind
 
I think we're looking at a purely American Ricumbili with motor from lawn and garden equipment. And if the motor has a recoil starter and clutch =)
Wheeeeeeeeeeeee !

The only thing missing is a 1 liter soda bottle fuel tank.
 
well I was meaning keep the pedals and for gods sake no drilling...

...actually now that I think of it I don't like it. you would never be able to stop pedaling.

Nevermind

If you want to build a bike without pedals....Go for it. Don't let anyone discourage you. :)
:ride2:
 
Nah I have to have pedals and motor. and if I have motor I want to be able to let it do the work and be able to keep my feet still.

On this bike the pedals would always turn.

I didn't think of all the ramifications until it was posted here and there were a couple comments
 
or just get a front freewheel setup. Then you could keep the pedals in place while the motors running.
 
I may have posted this already, but I'm getting old and forgetful, but the bike you posted is right in line with this one. Pure genius. You still have all the bike's gears. Of course, it's now a motorbike and not a pedal bike anymore, but it's at least a way to go. Yes, a freewheel crank could be used and I assume you could still pedal, but freewheel cranks are very expensive even if you can find one. And I'm sure you have to let off the throttle when changing gears or the chain will probably fly off.
motorbike1qs2.jpg
 
Here's a front wheel drive setup I've been working on. This pic is from last winter and I have the engine on it and have added more braces and am almost ready for a test run. I'm using a 2 hp Briggs and it wasn't getting spark but will soon. I used aluminum angle that I already had and avoided welding, but angle iron is the better way to go. Too much drilling otherwise. That's a gokart/mini bike wheel/sprocket combo from Northern Tool. I got the idea for this from Dennis Becraft, who made one like it almost 20 years ago that ran great.
bikeafterfm6.jpg
 
as far as front freewheels keep an eye out for ross road/race bikes. They had a fixed rear casette and a freewheeling front sprocket one way any way. just the reverse of most all bikes produced. kinda cool just a FYI.
 
Here's a front wheel drive setup I've been working on. This pic is from last winter and I have the engine on it and have added more braces and am almost ready for a test run. I'm using a 2 hp Briggs and it wasn't getting spark but will soon. I used aluminum angle that I already had and avoided welding, but angle iron is the better way to go. Too much drilling otherwise. That's a gokart/mini bike wheel/sprocket combo from Northern Tool. I got the idea for this from Dennis Becraft, who made one like it almost 20 years ago that ran great.
bikeafterfm6.jpg
Very cool. Looking forward to new pics.
 
Back
Top