Pics of Cranbrook build

[scrollerguy]

Here are some pics of the Bremen Flyer. It is not finished, waiting for the rear rack to complete the lights. Then I'll finish it. Should be about time for a ride!

Any suggestions?

Scrollerguy

 

[Greg58]

By looking at all the coffee cans I can see you enjoy a cup of Joe! Your bike is looking good, I also have a cranbrook. If you haven't replaced the fender braces keep a close eye on them, they will break or the fender itself will crack at the mounting screws. I removed both of mine after a friend tried endlessly to keep his on a schwinn, till one day the rear came loose and almost caused him to wreck. His cracked at the screws.

 

[scrollerguy]

It's not that WE like Joe, it's my better half. If any of the coffee makers need a good tester, she would be the one. I can't remember how many coffee makers we have gone thru in our 21 years of marriage, let's just say it's a bunch!
Glad you like the build, I took the exhaust off for easier access for the wiring.
7 coats of varnish on the side panel.

Scrollerguy

 

[Mannhouse51]

Sharp looking bike. I like the varnished wood , very classy.

 

[donb4103]

That`s a good looking Cranbrook. You should have a lot of fun with her!