No Spark

H

Hope94829

New Member
I have A 66/80cc on a mountain bike I had no spark so I repalced my magneto and the bike ran fine again for two days. Now its dead again so i put in A new cdi and a new spark plug and... NOTHING PLEASE HELP
 
mine did that while riding. blue wire broke off inside that attaches to the magneto. soldered it back up and ran fine. i'd keep checking that wiring
 
Here's a helpful list from forum member AI.Fisherman on no start situations. I know it would be easier to guess what is wrong and tell you, but you'll just be throwing money at the problem. #1 Remove the kill switch and see if it will start. If that doesn't work, check your wiring. #2 Make sure all your connections are good and not touching any metal. #3 Use the above list to pinpoint your problem.

https://docs.google.com/document/d/1aBeJuoS--VQWwXysc07rpscTUbPzgc93xjiQBgsyFjc/edit?pli=1

Good Luck,

Chris
AKA: BigBlue
 
You must log in or register to reply here.
Back
Top