Bobert
New Member
Ok So it's been a few months since the last post I've made... Well I did finally get my motor, It did fit with some moditfications. I wasn't smart enough to take pictures when I was doing them but I do have the afterwards lol. Except for the Intake which I am waiting on right now.... It was Aluminum, and I don't have the right equipment at home to weld it, so I took it to a friends shop. I'm having him make the base plate made out of mild steel, So I can work with it. I will be fabricating a new intake, and possibly a dual intake for s's and g's...... I should have the piece this week. Any ways here are some updated pictures of the build..
Ok here's a run down of what I got and what I'm doing or have done....
Bike - Next La Jolla street cruisier...
Motor - Jet Stealth 80cc w/slant head. (it's better to get the Silver and Paint it Yourself)
Modifications - First and formost, The intake has to be completely redone, and I had to cut the front engine mount, and the pedal crank is barely clearing the muffler.
Intake - Is made from Aluminum, I can't work it at home. So I'm doing it out of mild steel. I have a 3/4" pipe (ID) for the actual intake and a 3/16" thick base plate. I will have pics during fab and when finished.
Engine Mount - I do have pix of the finished product. I had to take off about a 1/2" but it fits in place better now
Muffler - As for this I'm going to see how well it goes, and if I need to I'll go with the poo poo pipe or see about fabing something else up.....
------------------------------------------------
All that being Said When I finish the Intake and it works out alright I might be able to make some more of them just let me know.........
Now for the pictures, I have more so I will put another post up to finish all of them....
Pic #1 a loose fit of the Motor after We got the sprocket on and the wheel trued. All the little things are there too!
Pic #2 & #3 are of the Modified Engine Mount, I did pull off about a 1/2" and It gave me more clearance.
Pic #4 & #5 Are of the little bit of clearance I had with my frame and the intake.... I sanded it so melted paint wouldn't get into the motor..... Well I don't need it anymore lol....
Next pix on Next post!
Ok here's a run down of what I got and what I'm doing or have done....
Bike - Next La Jolla street cruisier...
Motor - Jet Stealth 80cc w/slant head. (it's better to get the Silver and Paint it Yourself)
Modifications - First and formost, The intake has to be completely redone, and I had to cut the front engine mount, and the pedal crank is barely clearing the muffler.
Intake - Is made from Aluminum, I can't work it at home. So I'm doing it out of mild steel. I have a 3/4" pipe (ID) for the actual intake and a 3/16" thick base plate. I will have pics during fab and when finished.
Engine Mount - I do have pix of the finished product. I had to take off about a 1/2" but it fits in place better now
Muffler - As for this I'm going to see how well it goes, and if I need to I'll go with the poo poo pipe or see about fabing something else up.....
------------------------------------------------
All that being Said When I finish the Intake and it works out alright I might be able to make some more of them just let me know.........
Now for the pictures, I have more so I will put another post up to finish all of them....
Pic #1 a loose fit of the Motor after We got the sprocket on and the wheel trued. All the little things are there too!
Pic #2 & #3 are of the Modified Engine Mount, I did pull off about a 1/2" and It gave me more clearance.
Pic #4 & #5 Are of the little bit of clearance I had with my frame and the intake.... I sanded it so melted paint wouldn't get into the motor..... Well I don't need it anymore lol....
Next pix on Next post!
