new and improved

[FileStyle]

well here are some pics of my upgrade that Ive been slowly working on over the winter. I ordered a Kings sprocket and had to modify a bit as it would not work as stock. I then made a plate to go over the center of the sprocket that I took the center out of. ( I transferred the holes from the sprocket to the plate to remain true). I used some 5/16" x 3/4" hex head bolts to bolt plate onto sprocket also used lock tite with flange nuts. after everthing came together , it worked out pretty good.

 

[FileStyle]

I had to offset the sprocket over at least the thickness of the sprocket to stay out of the chainstay ( 1/4"). also re worked my Idler as I used to have a tensioner arm that would always keep the chain taught. Also new forks Rock Shox Dart 3 with disc brakes and a Ritchey handlebar and threadless stem set-up. and also a new tuned pipe. sorry about some pics being not to clear but will try again later as they all come from a camera phone. I had went to a 35T sprocket from a 36T I want to gain just a little more edge over my buddy Hookwormrider. and cant wait to ride again just to work a few bugs out of the system and to chase off any gremlins that may be lurking around. I hope you can appreciate my work and see the beauty of a motorized bike , FileStyle.
("80 cc") 66 cc motor with 35T sprocket and tuned exhaust some porting of intake and exhaust upgraded wire and plug and run 4oz. to a gallon fuel mix. top speed as with a 36T---(37mph).

 

[FileStyle]

just wanted to show off my ride. The Blue Agressor GT. 38 mph top speed 35T sprocket.

 

[FileStyle]

just a few pics of the shop.

 

[commander]

Hey file ,

that bike looks very nice. I would like to know how or where you got that muffler ? and did it make any performance changes like in the sound or speed. I must also add that is the best looking muffler I have seen in awhile , very clean and appropriate looking

http://motorbicycling.com/attachments/f15/7086d1238727921-new-improved-photo0097.jpg

 

[FileStyle]

I ordered the pipe from e-bay (pocket pike performance pipe) and then custom fit the pipe to my bike.

 

[azbill]

carry much on that rack ?
those supports look too light to hold anything
nice job dude

 

[HOOKWORMRIDER1]

he may think he has an edge till we hit a head wind then the 36 tooth sprocket may shine

 

[HOOKWORMRIDER1]

heck i bet he could carry a pony keg on that rack

 

[commander]

Nice file, yea ur muffler is one of the best ones I have seen, and also your rack is a cool design also. very nice how it all comes together for you

 

[Pablo]

file - I like that bike!

 

[FileStyle]

the rear carrier is mounted from the seat post and the 1/8" strap steel is for the panier bags. so the bags dont go in the wheel. of all the things I ever had to haul , it wasnt more than I could carry! it does fine it also acts as a fender so it helps.

 

[FileStyle]

top speed 40 mph , flat ground , slight tailwind , low rpm , running smooth , 40 degrees wish you were here!