Need advice and Parks badly

[James Richardson]

I'm trying to mount a 79cc predator rear mount using a rib belt I need a 5/8 inch bore centrifugal clutch for a ribbed belt. HELP! !!!

 

[curtisfox]

Do a search you might find a shorter one, they take a 3/16" by 1/4' key............Curt

https://www.amazon.com/Adapter-Pulley-Reducer-Sleeve-Bushing/dp/B01FDZWFFE

 

[Venice Motor Bikes]

You might have to make it yourself... Seems like it wouldn't be too difficult to weld a ribbed pulley onto a clutch

 

[James Richardson]

Do a search you might find a shorter one, they take a 3/16" by 1/4' key............Curt

https://www.amazon.com/Adapter-Pulley-Reducer-Sleeve-Bushing/dp/B01FDZWFFE

 

[James Richardson]

Thank you!!! I appreciate you help and now i have a lighter heart. I'll check it out asap. Zeedawgg

 

[curtisfox]

You might have to make it yourself... Seems like it wouldn't be too difficult to weld a ribbed pulley onto a clutch

I have welded a pulley to a clutch with good success, but worpes the the bussings. Need to ream them when done, but think any auto parts store with mechanic service can do it. With the link i posted you can use just about any 3/4" clutch.

By ribbed are you talking serpentine?...............Curt