My Carburetor over flow tube keeps leaking. Grubee Skyhawk CNS Carburetor HELP!

[rexford]

Hello, I just recently bought a 66cc sky-hawk bike and it has a Grubee Skyhawk CNS Carburetor. I've tried cleaning the pin and flipping the float but I cant get any other methods of fixing this problem. I am becoming quite frustrated at this problem. Please submit methods of fixing this problem.

 

[rexford]

I've seen other people with similar problems.

 

[James912]

Sell the cns carb and buy a nt carb. Simple as that.

 

[rustycase]

Rex, you will probably need to fiddle with the float adjustment tang a bit to get it right... very small adjustments 'til it works.
All of a sudden it will be working properly...

Be sure to use a fuel filter !

Best
rc

 

[rexford]

where is the Float adjustment?

 

[rexford]

would the float adjustment be a screw on the Carburetor?

 

[rustycase]

Oh Gosh, Rex....

The float adjustment tang is inside the float bowl under the carb venturi.
it's in the middle of the metal connector between the two sides of the float assembly and makes contact with the needle valve. VVVery little adjustments!!!!!

Rex, you REALLY should read through the threads on cns carbs before doing this kinda stuff... that's the best advice I can give you.

good luck
rc

 

[rexford]

I'm sorry for the newbie questions but I can't help it.

 

[rustycase]

no prob... really.

u just be btr off reading the threads and learning!
rc

 

[rexford]

The smallest out of the two tubes in the middle is the one you need to adjust right?

 

[rexford]

Also is my float the correct direction?