Motorized Kickslead

Re: Motoized kickslead

curtisfox said:
This is AWESOME i have never seen anything like it here in the states. Would be fun to start something like that here.............Curt
Click to expand...

Yes! (^) Motorizedkickslead.com

Kicksleeds arent just for

kicking any more
 
Re: Motoized kickslead

Your runners look like they come off a regular sled is there a serent curve they hav to be? This looks like a fun project..........Curt
 
Re: Motoized kickslead

curtisfox said:
Your runners look like they come off a regular sled is there a serent curve they hav to be? This looks like a fun project..........Curt
Click to expand...

The runners come from an ordinary Swedish "kickslead" I have not done the runners myselves, they are manufactured in a forge where they get the right shape, often they forged by two different types of steel, hard steel treads and softer as the "backbone" of the runner . They must be smooth sideways in order to be able to turn
 
Last edited:
Re: Motoized kickslead

I have now finished the snow chain, used a smaller chain than I had intended to use. but it was much better attuned exactly the length and pitch around the wheel.
I soldered chain links together with brass solder, hope it stays together
 

Attachments

  • IMG_0182[1].JPG
    IMG_0182[1].JPG
    32 KB · Views: 243
  • IMG_0183[1].JPG
    IMG_0183[1].JPG
    55.8 KB · Views: 225
  • IMG_0181[1].JPG
    IMG_0181[1].JPG
    72.3 KB · Views: 262
A little update! Mount the gas tank with rubber vibration dampers. It remains now only the final finisen, weld clear all that remains, sanding, painting, etc. Then then it will be a test drive :)
 

Attachments

  • IMG_0184[1].JPG
    IMG_0184[1].JPG
    52.7 KB · Views: 257
  • IMG_0185[1].JPG
    IMG_0185[1].JPG
    43 KB · Views: 231
  • IMG_0186[1].JPG
    IMG_0186[1].JPG
    62.1 KB · Views: 234
  • IMG_0187[1].JPG
    IMG_0187[1].JPG
    69.7 KB · Views: 227
So what is hapening? Wheel spinning? Maybe need to lower it down for more bite?

I like it plain and simple.....Maybe have to study some of the others..........Curt
 
curtisfox said:
So what is hapening? Wheel spinning? Maybe need to lower it down for more bite?

I like it plain and simple.....Maybe have to study some of the others..........Curt
Click to expand...

Yes the problem is that the wheel just spins.! The solution is probably not to press the wheel more to the ground, The wheel is about 3 inches below the runners, when there is no load on the runners. Need probably a bigger and wider wheel with studs to get enough grip on the ice
 

Attachments

  • 2013-01-26 10.21.42.jpg
    2013-01-26 10.21.42.jpg
    46 KB · Views: 230
max350 said:
Yes the problem is that the wheel just spins.! The solution is probably not to press the wheel more to the ground, The wheel is about 3 inches below the runners, when there is no load on the runners. Need probably a bigger and wider wheel with studs to get enough grip on the ice
Click to expand...

Just wondering if the other sleds run a chain down the center of the wheel like your? That would be a continues band of steel.
It sure would be fun to start a sport like that here,like snowmobiling only a lot cheeper..............Curt
 
curtisfox said:
Just wondering if the other sleds run a chain down the center of the wheel like your? That would be a continues band of steel.
It sure would be fun to start a sport like that here,like snowmobiling only a lot cheeper..............Curt
Click to expand...

You're right, maybe not a good idea with a chain in the middle of the wheel, maybe that makes the wheel lifts off the ground and allow the other chains do not get any traction on the ice. I will remove the chain and try again if there is a better grip from the tires without the the chain in the middle
 
Make a pedal that you can step on or a platform so your weight can be on the wheel and the runners float instead of vice versa. By the way, that thing is absolutely awesome!
 
Removed the chain in the middle, became much better traction. Added an extra chain link for each link so it was double links (see picture). Think it's quite ok now. Proceeding now to make it complete
 

Attachments

  • IMG_0191[1].JPG
    IMG_0191[1].JPG
    68.4 KB · Views: 249
  • IMG_0192[1].JPG
    IMG_0192[1].JPG
    70.8 KB · Views: 267
That would be fun to start that sport around here. I have 4 sons and showed them seems that if you can't buy it they don't seem intrested. There are plenty of lakes to run on around here and in Staples for that mater.......Minnesota the land of 10,000 lakes .........Curt
 
Last edited:
You must log in or register to reply here.
Back
Top