Motorized bike moves freely without the clutch pulled in

[MarcusMotorizedBikes]

Hey guys, I recently installed a new top end to my engine, all the new components seem to be functioning properly but the bike will not start, the bicycle is able to move freely without the clutch lever pulled in

Has anybody experienced or has knowledge on this issue?

If so, please let me know how to fix this problem, thanks in advance!

 

[Venice Motor Bikes]

I would start by back tracking what you did to see what you can find

 

[MarcusMotorizedBikes]

I would start by back tracking what you did to see what you can find

I ended up trying to do that this morning, I was unable to find an issue, I installed the piston on the crank correctly and everything, I do have 2 broken gaskets though (Cylinder head and Base of cylinder) could this be the problem?

 

[Venice Motor Bikes]

I ended up trying to do that this morning, I was unable to find an issue, I installed the piston on the crank correctly and everything, I do have 2 broken gaskets though (Cylinder head and Base of cylinder) could this be the problem?

A broken head gasket will cause no compression!

 

[Tyler6357]

Check your clutch, it needs to be adjusted.

 

[MarcusMotorizedBikes]

Check your clutch, it needs to be adjusted.

Thank you, I’ll be sure to try this

 

[MarcusMotorizedBikes]

A broken head gasket will cause no compression!

Definitely, I’ll be sure to order new gaskets