methods for clearing the motor with yr pedals

[anim8r]

stuck with a set of aluminum cranks that bang into the case & then into the muffler.
Just wondering what the options are....

 

[Al.Fisherman]

stuck with a set of aluminum cranks that bang into the case & then into the muffler.
Just wondering what the options are....

Bend both cranks and muffler. Replace cranks and bend muffler, or remove the engine :>)

 

[anim8r]

thanks Ron. that`s about what I figured. I was kinda hoping for a way to put a spacer in there to widen the cranks. but that`s starting to look impossible...

 

[fx-2]

You might want to check this out . It look like what you need .http://www.sickbikeparts.com/catalog/product_info.php?cPath=23&products_id=107&os

 

[Al.Fisherman]

thanks Ron. that`s about what I figured. I was kinda hoping for a way to put a spacer in there to widen the cranks. but that`s starting to look impossible...

The aluminum cranks can be bent, but don't use too much heat. When applying heat, put pressure on the peddle crank, and don't over due it.

 

[fx-2]

sorry double post