Kill switch

[jmr3394]

Ok so my bike's kill switch came with two wires. I hooked one up to the white wire but where do i put the other?

 

[timboellner]

Ground the other wire to the bikes frame. The wire usually has a ring connector soldered to it .
The water bottle holder bolt is a good spot, but anywhere will do as long as it attaches to the frame.

 

[2door]

Here is a wiring diagram that has been posted many times before. Wire your bike to match and you'll be fine.
Tom

 

[Venice Motor Bikes]

Don't connect it to the white wire! (It could someday short out the ignition)
Use 2doors diagram!!