Kill switch momentary "ON"????

captainrichhill

New Member
May 31, 2008
203
0
0
How do ya wire the kill switch??? I connected mine so that the BLUE wire goes through the kill switch then to the coil. I had to hold the button in to get the engine to run. Any ideas??? Can I ground the coil wire (blue) somewhere???:confused:

I also have an annoying rattle in my exhaust. It sounds like there is a nut rattling around in the muffler. It even makes it when the bike is off and I shake the bike. Any ideas. I may have to cut it open and re-weld it.
 
Last edited:

stude13

New Member
May 28, 2008
404
0
0
north bend wa.
hi hill; can-0-worms. on my rig a powerking the white wire goes to kill. hooking the kill wrong can fry your mag. there is a screw at the end of the pipe,remove pipe from barrel,
 

captainrichhill

New Member
May 31, 2008
203
0
0
Dax 70 instructons say to use the blue wire. There is a screw at the end of the exhaust but it's also tack welded together. I would still need to cut the welds.