Nghtrider62
Member
Has anyone done this Yet? Routing the brakes and throttle cable through the Handle bars and Frame for a cleaner look. ??? I'm curious ....
In Frame & Handlebar wiring
- Thread starter Nghtrider62
- Start date
Don't have a link to photos but, yes, it's been done.
The problem is you must install the cables so there are no sharp bends or kinks, especially in the clutch and throttle cables. They need long sweeping curves to reduce any cable bind. Routing them through the frame or bars usually require them to be bent too sharply to give good, friction free movement.
Tom
The problem is you must install the cables so there are no sharp bends or kinks, especially in the clutch and throttle cables. They need long sweeping curves to reduce any cable bind. Routing them through the frame or bars usually require them to be bent too sharply to give good, friction free movement.
Tom
Nghtrider62
Member
I will search youtube.
allen standley
Well-Known Member
Small holes, rubber grommets, fish through with a coat hanger. Locate the sparker behind and under seat. All my bikes get this treatment. I should have examples. Check out my builds albums for pics of this.