I am afraid to ride bike over 2 miles!!

[daveet6666]

These kits are unreliable and break down every other time I take it out and the thing is i do not go over 2 miles cause I know better! Just got back from store now back wheel won't spin
and lever is pushed as far as I can get it

 

[Greg58]

Dang Dave sorry you're having so much trouble, can you pedal? If not the motor chain could be caught under the cover or the internal parts of the rear wheel failed.

 

[daveet6666]

Dang Dave sorry you're having so much trouble, can you pedal? If not the motor chain could be caught under the cover or the internal parts of the rear wheel failed.

No can't pedal

 

[Greg58]

Try rolling it backwards, haven't you had a problem with the rear wheel before now?

 

[daveet6666]

No can't pedal

Try rolling it backwards, haven't you had a problem with the rear wheel before now?

No I just got this bike going but I noticed it was getting harder to pedal then I pulled clutch cable in got it started then died I couldn't pull lever in no more

 

[Greg58]

Try moving the lever on the engine by hand, if it will move the cable has slipped.

 

[Greg58]

I should have said if the bike will role.

 

[daveet6666]

No can't pedal

Dang Dave sorry you're having so much trouble, can you pedal? If not the motor chain could be caught under the cover or the internal parts of the rear wheel failed.

No can't pedal

I went to store

 

[daveet6666]

Try moving the lever on the engine by hand, if it will move the cable has slipped.

No tried that

 

[daveet6666]

No tried that

Stuck clut tch pads? Just looked that up on youtube

 

[Greg58]

Take the spark plug out and see if the engine will turn.

 

[Greg58]

Clutch pads stick on a new never run engine, rarely on one that's been running.

 

[daveet6666]

Clutch pads stick on a new never run engine, rarely on one that's been running.

Yeah I took plug out that's how I got home

 

[Greg58]

A couple of things could have happened, the clutch arm on the engine can spin on the shaft if it’s a two piece style, the bucking bar may be seized or the side cover bolts are loose.

 

[Greg58]

A clutch pad may have moved out of place locking the disc to the big gear, hopefully you can find it

 

[daveet6666]

Tha

A clutch pad may have moved out of place locking the disc to the big gear, hopefully you can find it

Thanks Greg appreciate it

 

[xXNightRiderXx]

Just my $.02

Your clutch plate nut could be too tight. Another issue I had was with the bearings in the clutch assembly. Apparently, they need lubrication, but the pads will not grip if you get any lube on them, so be careful. Other than that, Greg covered it all.