HP 36T Sprocket Disc Brake Hub Holes ?

[Gawdzahh]

So I was planning on mounting my sprocket to my disc brake hub on my wheel by drilling 6 holes in the sprocket that comes with the kit.

Disc Brake Hub... (The 6 hole mount)

But then I found this sprocket and I'm not sure if the 6 holes are meant for the disc brake hub mount?

36 Teeth Sprocket (I think has 6 hole mount)

Anyway I just need someone to verify that those 6 holes are made for disc brake hubs.

~Regards Gawdzahh

 

[Gawdzahh]

Think I might just buy it, Its only $20 and looks like it will probably work.

 

[Andyinchville1]

HI,

More than likely the 6 small holes are for the 6 hole disc brake mount.....(typically the center bore on a factory motorized bike sprocket is about 1.48 inches in diameter and the 6 holes for a disc brake mount typically is VERY close the the edge of the center bore as in your pic).

Andrew

 

[Gawdzahh]

HI,

More than likely the 6 small holes are for the 6 hole disc brake mount.....(typically the center bore on a factory motorized bike sprocket is about 1.48 inches in diameter and the 6 holes for a disc brake mount typically is VERY close the the edge of the center bore as in your pic).

Andrew

Yeah thats what I thought, Probably would of been really hard to drill 6 holes in the standard sprocket that close to the center hole.

Cheers for the answer anyway Andyinchville