how to hook up kiil switch

[flipkick7]

i have 2 wires coming from kill switch and bike runs fine without them connected.
i attached blue from magneto blue from cdi and a wire from kill,
and
black from both cdi and magneto with the other from kill

what is the right way to do it without using the white wire

 

[old motorbike]

I hooked one wire from the kill to the blue-green and the other to ground.
Seems to work good.

 

[Bikeguy Joe]

The white wire is for lighting only.

 

[deacon]

Make sure there is no bare wire at the end of the white wire though it will also ground out the engine if it touches the frame

 

[Dave31]

If you register at Spook Tooth, you can watch his video of hooking up the kill switch

link.........Spooky Tooth Cycles - Motorized Bicycles: Gas Powered and Electric Bikes - VIDEO: Kill Switch Wiring

 

[4wdingman]

connect one kill switch wire to one the the wires coming out of the motor and the other kill switch wire to the other wire from the motor.


good luck