How do I remove these?....

[Mind_Reader7]

Do I remove these 2 nuts?

I cannot find out how the **** to get them off.

 

[corgi1]

I bet there is something in sticky notes about that,Norm made the instrutible I think,,if they are turning the motor you may meed to put the jug back on so you can put a length of rope in the spark plug hole to keep the motor from turning

 

[MotorBicycleRacing]

I bet there is something in sticky notes about that,Norm made the instrutible I think,,if they are turning the motor you may meed to put the jug back on so you can put a length of rope in the spark plug hole to keep the motor from turning

It's easy.........done it many times.
I put a round piece of tubing/etc between the sprocket and the
housing so that the sprocket is jammed.
Then turn the nut with a socket wrench.

Move the tubing from the bottom to the top
to jam the sprocket while tightening or loosening.

 

[Mind_Reader7]

It's easy.........done it many times.
I put a round piece of tubing/etc between the sprocket and the
housing so that the sprocket is jammed.
Then turn the nut with a socket wrench.

Move the tubing from the bottom to the top
to jam the sprocket while tightening or loosening.

I tried that. I don't have a socket big enough, and a spanner is to bulky. I'll buy some bigger sockets I guess.

 

[Venice Motor Bikes]

It's easy.........done it many times.
I put a round piece of tubing/etc between the sprocket and the
housing so that the sprocket is jammed.
Then turn the nut with a socket wrench.

Move the tubing from the bottom to the top
to jam the sprocket while tightening or loosening.

I 'double up' a piece of chain between the case & sprocket.