Hello

[UncleSlippy]

My name is Ryan, Im new here, just thought i would join up so i can post. Im on my 5th MB build and im hooked. I currently have a Schwinn jaguar frame 7 speed, v brakes, Stripped it, painted low gloss flat black and put 23 inch rise ape hangers on it. The motor im running is a grubee skyhawk angle fire 66cc.
I'll post pics of her tonight. by the way, how do i get the dang left side 10 tooth sprocket off. i have the weird little tool that came with the kit, but its doesn't fit. nice to meet yall!

 

[Mike Bike]

hi and welcome, im also hooked on MBs.

on that 10t sprocket it take a little wiggling to get off..

 

[UncleSlippy]

Thanks. I haven't gotten that far yet. I cannot break the nut loose that holds the 10 tooth on.

 

[Mike Bike]

humm, have u tryed holding the piston in one place and then try to unscrew?

 

[azbill]

welcome from FH
if you put a ratchet on the nut and give the handle a quick 'smack' with a hammer,,,the nut will break loose

(don't forget to remove the metal dowell/pin or you will do internal damage to the clutch,,,I found this out the hard way )