Hello from California

Discussion in 'Introduce Yourself' started by storm1605, Nov 20, 2014.

  1. storm1605

    storm1605 New Member

    Joined:
    Nov 20, 2014
    Messages:
    1
    Likes Received:
    0
    Hi everybody :

    I am new here and I need your help.

    1) I have a 2 Stroke 80cc bike and I would like to know the steps to connect the switch with the coil and the coil with the engine.

    From the hand switch (Killing Switch ) there are two wires coming out
    One black and the other red.

    From the Coil a blue and black .
    From Engine a blue,black and white.

    Any good samaritan that can help me to connect this right and not to damage my engine,coil .?

    2) Also having problems taking the coaster brake arm off. Used the size 17 tool . Perhaps doing something wrong .

    ANY:-||HELP?
     
  2. MotorBicycleRacing

    MotorBicycleRacing Well-Known Member

    Joined:
    Jul 28, 2010
    Messages:
    5,717
    Likes Received:
    35
    Welcome to the forum from Socal

    Connect blue to blue and black to black to get motor to run without the kill switch.
    Cap the white wire off and do not use.

    Either color of the wire from the kill switch connect to the 2 blue wires and the other to the black wires as a 3 way splice.
     
  3. 2door

    2door Moderator
    Staff Member

    Joined:
    Sep 15, 2008
    Messages:
    16,308
    Likes Received:
    30
    Here you go.

    Tom
     

    Attached Files:

Share This Page