First 2 stroke build with RAW 80cc engine

Kristof

Kristof

New Member
Hi,

I just recieved my RAW kit. (how do i know if its really an 80cc RAW engine?, it has no stickers on it) I checked for missing parts and have done research.

This is what I did so far:
1. Checked for damage and missing parts.
2. Took apart engine, just the 3 covers, cylinder, and head.
3. Im on my way to Oreily auto parts and maybe ACE hardware to look for Castor oil or Opti - 2 oil and an NGK spark plug... I hope I find these. and maybe a K&N air filter... if its not too expensive.

I have not recieved my walmart bike yet, it will come in on monday.

Please add to the list.

I need tips for the break in of the engine.
 
My first build was with a RAW motor. Nice motor. 80cc motors are larger than 50cc motors and you can tell just by looking at them. Just a clue here - dump the carb and get a really good one. You can make the kit one work, but I like more akjustments. Good luck.
 
I just went to both Oreilly and Ace, they don't have anything.

Not looking good. =[

Is it safe to break in engine with the stock spark plug/muffler and with cheap oil?
 
You must log in or register to reply here.
Back
Top