favorite 2-stroke oil and mix

oldspeedsi

oldspeedsi

New Member
Just wandering what every one is running out there just got my setup broken in and tuned its a basic 66cc jet motor kit with SBC pipe and I use AMSOIL dominator Synthetic 2-Cycle Racing Oil at 40:1 but it smells very fishy (really no joke) and not much smoke at all please post your favorite combo.



Im sure this has ben done before but im a noob and like fresh feedback if you got itbrnotdnutusflg
 
Mix in an ounce of castor oil with 1 gallon of your Dominator mix. You will feel and smell it.

I never noticed Dominator smelling fishy?? Odd.
 
Pablo said:
Mix in an ounce of castor oil with 1 gallon of your Dominator mix. You will feel and smell it.

I never noticed Dominator smelling fishy?? Odd.
Click to expand...

Hey Pablo, i hate/dont order stuff. is there anywhere in L.A. I can buy dominator to try
 
Try a local M/C shop they have the good stuff!!! and supports the local economy that's my source. 10.99 a quart ish
 
Man i just got a good deal on a gal of amsoil hp injecter, and now I don't even want it after reading this. I gotta try the Opti 2
 
I used Penzoil for air cooled engines, 40:1 Cheap, and makes just a little smoke when cold, none after warm up.
 
I always used Klotz synthetic in my kx250. It was the best by far for the kx. It's the only thing I have used in my china motor, so I have nothing to compare to in that engine. Smells good too lol
.crt.
 
Ditto on adding one ouce per gallon of Castor. The benefits are too numerable to mention but most importantly, you'll get piece of mind.
 
how bout marvel mystery oil?
 

Attachments

  • marvel.jpg
    marvel.jpg
    254.8 KB · Views: 327
Last edited:
Hello everybody,
i am breaking in my MB using Craftsman 16 oz. 2-Cycle Oil.
I drove about 50 miles so far.
Now that i 've read about other types of oils, I am wondering if I m using the right oil or i can get something better.is anybody using Craftsman 16 oz. 2-Cycle Oil?if so, what do you think about it?
your inputs are much appreciated
 
Hi all, fisrt time here, just wanted to say that ive been using valvoline 2 stroke.. basic stuff and no smoke what so ever using 4 oz to 1 gal. ive used two tank fulls so far and all is well.
 
sellouma said:
Hello everybody,
i am breaking in my MB using Craftsman 16 oz. 2-Cycle Oil.
I drove about 50 miles so far.
Now that i 've read about other types of oils, I am wondering if I m using the right oil or i can get something better.is anybody using Craftsman 16 oz. 2-Cycle Oil?if so, what do you think about it?
your inputs are much appreciated
Click to expand...

That oil is fine. Break in at 24:1 and go to 40:1 after a tank or two.
 
Quick question. Has anyone ever experimented with Duralube or Slick-50 type additives?

I've used Duralube in VW's and my Jeep for years and believe it really does work... would love to give the new 2 Smoker I'm about to buy the same "added protection"... or is it not that important?
 
You must log in or register to reply here.
Back
Top