Exhaust flange / header for Morini

Discussion in 'Morini Bicycle Engine' started by pedalchopper, Nov 3, 2016.

  1. pedalchopper

    pedalchopper Member

    Joined:
    May 9, 2010
    Messages:
    109
    Likes Received:
    1
    My fabricator is going to make me a pipe for Morinin on Schwinn Spoiler... The motor has a special fitting / flange that attaches to cylinder barrell / jug. I cannot find a place to purchase that fitting to attach to pipe we are building... SO WE CAN ATTACH PIPE TO CYLINDER BARRELL.

    ANYONE KNOW WHAT FITTING I MEAN AND WHERE I CAN FIND ONE? OR A FIX for my problem?
     
  2. dmb

    dmb New Member

    Joined:
    Dec 4, 2010
    Messages:
    1,359
    Likes Received:
    0
    you didn't say what motor you have but i'll guess its a s-6 t or c if so you need a pipe with a id of 1.55 or 39.5mm or so to fit over the o rings i don't think it has to be perfect but that is what mine is. its a hard size to find but a friend with a lathe it would be easy. good luck dennis
     
  3. dmb

    dmb New Member

    Joined:
    Dec 4, 2010
    Messages:
    1,359
    Likes Received:
    0
    i have a bunch of s-5 parts too, so let me know.
     

Share This Page