mechanickid
New Member
So i tried the carb mod where you drill a hole to get air past the jet from the float bowl, and that made my engine lose power and only idle with the choke on, so i put my new spare carb on but the engine still doesn't run well under power and will stall after idling for a little while even if the throttle cable is adjusted so that its idling at a high rpm... im not sure if my gas mixture is right... could that make this happen? also i changed my sprocket to a 38 but it was running fine b4 i changed the carbs around.
"if it isn't broken and you mess with it long enough, it will be" really applies here
"if it isn't broken and you mess with it long enough, it will be" really applies here