Diamondback Responce comp build

HOOKWORMRIDER1

New Member
May 21, 2008
38
0
0
Decatur Illinois
Tell us about the herky rear sprocket....
This new sprocket is made from four pieces.Three big washers and the sprocket
off a kids 12 inch weeled bike.It is bolted directly to a disc brake wheel.One washer is
drilled to fit the disc brake mounting hub,the other two are there to space the sprocket closer to the center of the wheel for proper chain allignment.Then i got a piece of vacume hose and fit it close to the outer edge of the sprocket (on the inside )so if my chain does come off it wont trash the wheel