Dellorto clone with mix screw review

GoldenMotor.com

Chaz

Well-Known Member
Jun 3, 2012
1,004
72
48
Vancouver, British Columbia
Okay, so the truth is I'm hoping to nudge someone who has one to post a review. It just needs to be a thumbs up or down or go into as much detail as you like.

Please excuse the misleading tactic.

Thanks,

Chaz
 

xseler

Well-Known Member
Apr 14, 2013
2,886
151
63
OKC, OK
I got one recently. The 'mix screw' is also kinda misleading ----- it still has a jet that needs to be tuned to your set up. The screw lets you do a finer adjustment than would be allowed with just a jet change. Mine came with a #58 jet and is still too rich for my bike. WIth that being said, when I took it to New Mexico (9000ft elevation), it ran the best it ever has up there.

Haven't decided if I'm gonna get a few smaller jets or find a precision drill bit set so I can make my own jets........
 

Chaz

Well-Known Member
Jun 3, 2012
1,004
72
48
Vancouver, British Columbia
Thanks for the information, xseler. I was hoping to not have to fiddle with jets. Time for me to get the precision drill bits as well. I have been thinking of checking out the Mikuni carbs.