Does anybody have for sell or know where I might find an after-market (reduced effort) clutch actuator that will fit a Raw Motors 80cc engine. Manic Mechanic did at one time but discontinued for some reason.
Chucky,Does anybody have for sell or know where I might find an after-market (reduced effort) clutch actuator that will fit a Raw Motors 80cc engine. Manic Mechanic did at one time but discontinued for some reason.
and how about the hub adaptor for the 7 speed swins need 1 toohey how much for one send it to justin if you have one thanks
rick
In some cases, "hack tricks" are all a person can afford. For others doing it themselves and finding solutions to problems is more satisfying than writing a check. Jim makes a good product but its not the only route available.get one from jim!!! forget about hack tricks bolt on some billet keep jim in buisness
The first MB I put together had a VERY stiff clutch lever. I called the supplier and was told that it was normal for these engines. I called several other suppliers and they confirmed the same thing...saying that about 1/2 of the engine kits they recieved had extremely tight clutches. Several suppliers said that a fix would sell. So without doing any further homework I made 250 units. It took a year to sell them.My clutch operates as good as any of the clutches I've had in the past of several motobikes. Unknown what makes my cheapo ebay noname kit so special.