Carb spitting oil**Fixed**
Hey, I just put my MB together and got it running, I am running a 20:1 for the break in, The bike starts and idles fine but it will not rev and there is a white foamy oil spitting out of the carb when I hold the throttle open trying to rev it up, I put the clip on the upper slot on the carb to try and lean it out but it does the same thing with no differance at all, I also took the carb apart to see if eveything looked good and I see no problems, no sticking float or loose jet. The exhaust seems clean with no oil dripping out with minimal blue smoke, I'm not sure what to do and any help would be great, Thanks.
Nick
****FIXED IT****
Hey, I just put my MB together and got it running, I am running a 20:1 for the break in, The bike starts and idles fine but it will not rev and there is a white foamy oil spitting out of the carb when I hold the throttle open trying to rev it up, I put the clip on the upper slot on the carb to try and lean it out but it does the same thing with no differance at all, I also took the carb apart to see if eveything looked good and I see no problems, no sticking float or loose jet. The exhaust seems clean with no oil dripping out with minimal blue smoke, I'm not sure what to do and any help would be great, Thanks.
Nick
****FIXED IT****
Last edited: