Hi. I got me some color remover which worked real well except for that most of the primer beneath is still sthere. What are my best option? Sandblast it? Sandpaper?
probably just a little scuff with steel wool or scotchbrite will give the stripper something to bite into.
personally i dont care for using stripper,as cleanup can be troublesome,not cleaning it thoroughly can lead to blemishes in the paint.i have sanded frames to bare metal,it really doesent take all that long.
must be a good primer if stripper isnt softening it.
I agree with tooljunkie. Scuff whats left real good with scotchbrite and paint it. Any primer that hangs on after chemical stripping should make a very good base.
I don't even strip it unless I have to as decent factory paint is as good as any primer you can apply at home once it's scuffed properly.
Yeah, but concerning keeping it as a good base, along the stem where the seatpost is placed it has gone off in some major areas. Would i not do best getting rid of everything that is still there, and on the rest of the frame?
It isn't unusual for a stripper to need a second application if the first one didn't take everything off. Have you tried reapplying the paint stripper to the areas where the primer is showing?
Are you sure you're dealing with paint and not powder coat? Some bikes, Nirve is an example, uses paint over a powder coat base. Powder coat can be very difficult to remove. There are special strippers that will cut it but it must be made specifically for removing powder coat. Regular stripper usually won't touch it.
I have used carb cleaner to rub paint off before, you could try that. I think I personally would just add another layer of primer to the whole thing, though.
I read it over a few times and see that it is not the paint he was worried about removing, but that the metal still would have residue of the paint remover left in the pores of the metal. I suspect he worried that new paint would not go on right with any of the paint remover not gone completely. I would think instructions on cleaning off the paint remover would be indicated on the painter remover instructions.
Sand blasting if you can do that would be best. I could not get the whole frame in the shops mid size sand blaster. Also some powder coated paint on the engine just does not come off easily with either careful sanding or various goop type paint remover.