Boardtracker fuel tank

G

gsreeves

New Member
So here I am newly interested in building a boardtracker replica. I have been seeing some parts here and there but have not seen a source for a really good looking fuel tank. Any help would be appreciated. I did try a search here in the forum but didnt find anything. Below are a couple of examples of what I am most interested in.
 

Attachments

  • henderson-600x450.jpg
    henderson-600x450.jpg
    59.7 KB · Views: 980
  • 1909reading.jpg
    1909reading.jpg
    33.5 KB · Views: 995
Last edited:
You aren't going to find a source for those tanks. People on here mostly make there own tanks when looking for something so specific. If its not custom then its a tank from some other type of vehicle: moped, mower, motorcycle, etc....hope that helps.
 
how bad do you want a costom tank were building the molds fore some fiber glass ones. but the y wolnt be ready till this wenter. if you want a costom steel tank let me know i can build one. kyle form acme labs.
 
jdmpunk said:
how bad do you want a costom tank were building the molds fore some fiber glass ones. but the y wolnt be ready till this wenter. if you want a costom steel tank let me know i can build one. kyle form acme labs.
Click to expand...




At this point I am trying to source all the parts, I am very interested in this project though. Can you provide a link to a website where I can see some pics and get an idea on your prices for steel and fiberglass tanks?
 
h0tr0d said:
You aren't going to find a source for those tanks. People on here mostly make there own tanks when looking for something so specific. If its not custom then its a tank from some other type of vehicle: moped, mower, motorcycle, etc....hope that helps.
Click to expand...




Thank you for the input. I am so new to this that all input was a value.
 
it depends on the bike and the finish detail your looking for. let me know what bike you have and ill work up a quote. we can build a comeplet frame kit if you like or a hole bike - motorbillet bike.jpg

boardt.jpg

fbomb.jpg

mod4.jpg
 
Last edited:
when you get the frame let me know and ill have you take some measurments and i can buld the tank for $80-$100 unpanted.
 
jdmpunk said:
when you get the frame let me know and ill have you take some measurments and i can buld the tank for $80-$100 unpanted.
Click to expand...

Thank you so much. I am looking forward to taking this on. I will catch up with you when we are closer to start gathering parts. Any idea on a price for the vtwin motor as of yet?
 
That is some good looking work. Did you change the clutch to use other springs, or did you beef it up with more springs? Makes it look early with the clutch out in the wind. I like the fork brace, gives it an early look also. Have fun, Dave
 
Egor said:
That is some good looking work. Did you change the clutch to use other springs, or did you beef it up with more springs? Makes it look early with the clutch out in the wind. I like the fork brace, gives it an early look also. Have fun, Dave
Click to expand...

yes we made a clutch kit witch in cludes a new bucket replacement dowels and springs
 
hello there. I would like to ask about the gast tank you can make.

so can you make ****om gas tank?

let me know so I can give you mesurments.

how we gona do the payment?
 
You must log in or register to reply here.
Back
Top