Another silly coaster brake question

Finfan

Finfan

New Member
My rear hub has been rattling like a can full of rocks so I decided to take it apart again and really go over it. The model is Falcon CF-(5/6)10. The stamping is bad and I'm not sure what the number is, but the design is very similar to a Shimano E-type. Anyway when I cleaned everything out I noticed for the first time that the inside diameter of the hub is smaller on one side than it is on the other. I am getting a bad feeling that when I took the hub apart to grease it while I was puting the bike together for the first time that I may have reversed the axle. So my question is on which side do the brake pads go? The larger diameter side or the smaller diameter side? Enquiring minds want to know! :-{ (?)
 
Also it will usually only go together w/ the shoes on the correct side, however it is possible to put the shoes in backwards.
How'd your wheel build go?
 
I have learned to always take them apart from the (bicycle) sprocket side, and lay them out in an "exploded view" format on your workbench.
 
tyrslider said:
How'd your wheel build go?
Click to expand...

Still waiting to hear about a rim and spokes. I am giving up on the bike shop I tried first and going to another this weekend. If they can't help then I will probably buy the rim online and get the spokes at the bike co-op.
 
I've heard a good shop is http://www.ordinarybikeshop.com/....I saw them on channel 12 working on a MB. The people had nothing but good things to say about them, but it could also be because they where on camera.

I always look at the wheels at bicas but I have never found one in good shape.
 
You must log in or register to reply here.
Back
Top