So I know most 4 stroke engines run clockwise when looking at there face ( pull start side ) meaning that you have to put the face on the drive side of the bike ( towards the pedals ) and run the chain down the left side or through a jackshaft but what if you use a set of gears to reverse the direction so you could have the output on the drive side of the bike?
Making it able to fit slant piston engines( 79, 189, 212+) easier by moving the piston to the other side away from the seat tube.
Making it able to fit slant piston engines( 79, 189, 212+) easier by moving the piston to the other side away from the seat tube.