B Bob in MO New Member Oct 12, 2016 #1 Hey Guys, Has anyone had any experience using one of these for the rear sprocket? Attachments adapter1.jpeg 97.2 KB · Views: 164
Allen_Wrench Resident Mad Scientist Oct 12, 2016 #2 I've never seen that one before. Where do you get it?
B Bob in MO New Member Oct 13, 2016 #4 Looks like this adapter may be new to the forum. If I get one, I'll report back how it turns out.
C curtisfox Well-Known Member Oct 13, 2016 #5 Thinking if that clamps to a hub it will not be strong enough with a hose clamp to grip and hold.......Curt
Thinking if that clamps to a hub it will not be strong enough with a hose clamp to grip and hold.......Curt
B Bob in MO New Member Oct 13, 2016 #6 My thoughts were that you would still use the regular rag clamp up with this adapter. What the adapter would get you is concentricity with the hub.
My thoughts were that you would still use the regular rag clamp up with this adapter. What the adapter would get you is concentricity with the hub.
crassius Well-Known Member Oct 13, 2016 #7 getting better alignment with the rag joint may be possible - most folks get it done OK without it, but if it is less than $10 it may be worth it
getting better alignment with the rag joint may be possible - most folks get it done OK without it, but if it is less than $10 it may be worth it
