Media added by crmachineman

GoldenMotor.com

Navigation

  1. Example Category 137
Browse albums

Most media items

  1. allen standley
    81

    allen standley

  2. John Newkirk
    46

    John Newkirk

  3. Mark Murphy
    36

    Mark Murphy

  4. Tyler6357
    36

    Tyler6357

  5. W
    29

    Weedge1212

Media statistics

Categories
1
Albums
1,888
Uploaded media
9,676
Embedded media
17
Comments
1,006
Disk usage
1.5 GB
View of chain tensioner.

View of chain tensioner.

  • 0
  • 0
View of engine.

View of engine.

  • 0
  • 0
Rear.

Rear.

  • 1
  • 0
Machined the crankcase to incorporate an offset to allow larger rear tire.

Machined the crankcase to incorporate an offset to allow larger rear tire.

  • 0
  • 0
View of the rear engine mount.

View of the rear engine mount.

  • 0
  • 0
Wearing my usual dirty mechanics clothes. After four days, I'm finally done!

Wearing my usual dirty mechanics clothes. After four days, I'm finally done!

  • 0
  • 0
Details showing the main drive tensioner and custom 30 tooth sprocket.

Details showing the main drive tensioner and custom 30 tooth sprocket.

  • 0
  • 0
Details showing the right side chain tensioner, which uses one of the little idler gears which was on the original derailleur. Worksman wheel and spro

Details showing the right side chain tensioner, which uses one of the little idler gears which was on the original derailleur. Worksman wheel and spro

  • 0
  • 0
Here you can see the special intake clearly. Also, you can see the way I moved the engine forward to gain clearance for the air filter.

Here you can see the special intake clearly. Also, you can see the way I moved the engine forward to gain clearance for the air filter.

  • 0
  • 0
another view

another view

  • 1
  • 0
I welded the aluminum parts together, then bolted it to the modified rear rack.

I welded the aluminum parts together, then bolted it to the modified rear rack.

  • 0
  • 0
I cut a foam rectangle and stuffed it into a sleeve of an old leather jacket, and then I fitted it into the aluminum channel.

I cut a foam rectangle and stuffed it into a sleeve of an old leather jacket, and then I fitted it into the aluminum channel.

  • 0
  • 0
Top Bottom