Media added by Amarion1

GoldenMotor.com

Navigation

  1. Example Category 137
Browse albums

Most media items

  1. allen standley
    81

    allen standley

  2. John Newkirk
    46

    John Newkirk

  3. Mark Murphy
    36

    Mark Murphy

  4. Tyler6357
    36

    Tyler6357

  5. W
    29

    Weedge1212

Media statistics

Categories
1
Albums
1,888
Uploaded media
9,677
Embedded media
17
Comments
1,006
Disk usage
1.5 GB
image

image

  • 0
  • 0
image

image

  • 0
  • 0
image

image

  • 0
  • 0
I had this ID plate made at work. Makes it a bit more legal seeming. Engine info and bike info. Got another one made to keep in the house. If it's sto

I had this ID plate made at work. Makes it a bit more legal seeming. Engine info and bike info. Got another one made to keep in the house. If it's sto

  • 0
  • 0
My rear tire found the biggest sheet rock screw they make so I got my new tires and a tube. Schwalbe Big Apples. Nice looking tire :-) also some salm

My rear tire found the biggest sheet rock screw they make so I got my new tires and a tube. Schwalbe Big Apples. Nice looking tire :-) also some salm

  • 0
  • 0
Walmart genesis astra bike with what I think is a 66cc skyhawk, SBP jackshaft, SBP air filter, SBP exhaust, and dual brake lever Still gotta put on

Walmart genesis astra bike with what I think is a 66cc skyhawk, SBP jackshaft, SBP air filter, SBP exhaust, and dual brake lever Still gotta put on

  • 0
  • 0
I read a lot of complaints on mounting the gas tank to this frame so I bought everything to make it work. didnt nead any of it! I used the strap tha

I read a lot of complaints on mounting the gas tank to this frame so I bought everything to make it work. didnt nead any of it! I used the strap tha

  • 0
  • 0
A good use of my UN needed chain tensioner and a hose clamp to secure the exhaust

A good use of my UN needed chain tensioner and a hose clamp to secure the exhaust

  • 0
  • 0
photo 1

photo 1

  • 0
  • 0
Almost complete. Need to install fenders and speed carb with k&n clone filter and fine tune it

Almost complete. Need to install fenders and speed carb with k&n clone filter and fine tune it

  • 0
  • 0
Need to install clutch cover sound dampened and repaint it. She cooked off in the oven.. Replaced stock/modified exhaust with a SBP one. Sounds b

Need to install clutch cover sound dampened and repaint it. She cooked off in the oven.. Replaced stock/modified exhaust with a SBP one. Sounds b

  • 0
  • 1
8133.jpg

8133.jpg

  • 0
  • 1
Rear mount kickstand would move towards the wheel a little too close for comfort so I added a piece of metal to stop that. Next I need to lengthen it

Rear mount kickstand would move towards the wheel a little too close for comfort so I added a piece of metal to stop that. Next I need to lengthen it

  • 0
  • 0
Freshly primed with no runs :-O

Freshly primed with no runs :-O

  • 0
  • 0
Made sure the motor fit before adding some paint

Made sure the motor fit before adding some paint

  • 0
  • 0
Stripped to raw steel. My mounts were crimping my frame so I welded on some whatchamacallits to fix that :-)

Stripped to raw steel. My mounts were crimping my frame so I welded on some whatchamacallits to fix that :-)

  • 0
  • 0
Paint removing with a little stripper, scraper, pressure washer, and sanding sponges

Paint removing with a little stripper, scraper, pressure washer, and sanding sponges

  • 0
  • 0
Brakes done. Everything fitted and running great. Stops like a champ too!

Brakes done. Everything fitted and running great. Stops like a champ too!

  • 0
  • 1
Dunno what it's called... Needed it to keep the brake cable from moving

Dunno what it's called... Needed it to keep the brake cable from moving

  • 0
  • 0
New paint :-)

New paint :-)

  • 0
  • 0
Parts used for brake brackets. Split shaft collars bought new for about $60 with shipping from a local shop. The rest is recycled

Parts used for brake brackets. Split shaft collars bought new for about $60 with shipping from a local shop. The rest is recycled

  • 0
  • 1
Where my brake build idea came from (dont know who drew it up but great blueprint!)

Where my brake build idea came from (dont know who drew it up but great blueprint!)

  • 0
  • 0
Home build rear Vbrakes

Home build rear Vbrakes

  • 0
  • 0
Home built front VBrakes

Home built front VBrakes

  • 1
  • 0
Top Bottom