GoldenMotor.com
The front and back bars of the trailer are smaller in diameter, and set at a slightly different hieght to the middle bar. There is a 1/4" plywood shi
The deck holds 2 'Rubbermaid' totes nicely.
This is my MAB with the trailer on. There is enough clearance to work with, but the trailer arm blocks access to my axle-mounted kickstand.
The middle bar is a larger diameter. These are 1 1/4" brackets. There is a wrap of rubber as a spacer between each bracket and the bar.
The front and back bars of the trailer are smaller in diameter, and set at a slightly different hieght to the middle bar. There is a 1/4" plywood shi
The connector clamped on to my bike. I had to go farther ahead to clear the 36T and chain, putting the trail really close to the back wheel.
Right rear angle.
The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.
CTripps

The front and back bars of the trailer are smaller in diameter, and set at a slightly different hieght to the middle bar. There is a 1/4" plywood shi

There are no comments to display.

Media information

Album
Trailer
Added by
CTripps
Date added
View count
464
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top Bottom