GoldenMotor.com
dax first run 2 First run was successful! Engine started mightily, and finger throttle works. It pulls from 2.5mph to at least 20, with the 1" rolle
boost bottle spacer 3 See how the tube does not interfere with the engine covers. The plastic tube deformed and popped out from heat or fuel softeni
Schwinn ambi throttle pic 2 Both controls at 0
Schwinn ambi throttle pic 1 demo video http://www.youtube.com/watch?v=uail5H5suA4&feature=youtu.be
dax first run 2 First run was successful! Engine started mightily, and finger throttle works. It pulls from 2.5mph to at least 20, with the 1" rolle
dax CX right side 1 I just drilled a small hole, and used one of the Dax screws and the black nut from the Planet Bike light, to mount it to the mo
dax CX left side strap bolt 1 I used a couple bolts from the kit and drilled new holes and threaded the holes for the bolts.
Getting ready to test the bike, using the Remote Throttle and a kill switch glued on the motor mount and grounded under the mounting bolt.
happycheapskate

dax first run 2 First run was successful! Engine started mightily, and finger throttle works. It pulls from 2.5mph to at least 20, with the 1" rolle

happycheapskate
I made a kill switch just by gluing a lamp switch (full off/full on). This engine can't be bump started, so I just used non-momentary switch.
 

Media information

Album
Dax Drive/Tanaka on Schwinn Avenue/Pscyhocross bike!
Added by
happycheapskate
Date added
View count
408
Comment count
2
Rating
0.00 star(s) 0 ratings

Share this media

Top Bottom