Prev
Getting ready to test the bike, using the Remote Throttle and a kill switch glued on the motor mount and grounded under the mounting bolt.
Next
Prev
dax first run 2 First run was successful! Engine started mightily, and finger throttle works. It pulls from 2.5mph to at least 20, with the 1" rolle
dax CX right side 1 I just drilled a small hole, and used one of the Dax screws and the black nut from the Planet Bike light, to mount it to the mo
dax CX left side strap bolt 1 I used a couple bolts from the kit and drilled new holes and threaded the holes for the bolts.
Getting ready to test the bike, using the Remote Throttle and a kill switch glued on the motor mount and grounded under the mounting bolt.
HC remote throttle cable. It's a piece of PVC tubing cut down to about 1/2". It has a tiny hole for the cable to run through (will wear a little a
Next
happycheapskate

Getting ready to test the bike, using the Remote Throttle and a kill switch glued on the motor mount and grounded under the mounting bolt.

happycheapskate
It runs great! I am so happy. This is fun! Now I can ride all the sidewalk/bike paths in Dallas, AND motor around to restaurants or museums, with only a flip of the QR lever.
 

Media information

Album
Dax Drive/Tanaka on Schwinn Avenue/Pscyhocross bike!
Added by
happycheapskate
Date added
View count
514
Comment count
1
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top