I'm in need of a set of round clutch pucks. They can be OEM or upgraded....I just need some pucks!!Please PM me
Thank you, Barron.
Thank you, Barron.
Round Clutch Pucks
- Thread starter RedB66
- Start date
Barron, Did you contact Pipelyne yet? I spokr with Dean and he told me he has some ready for shipping.
I wasn't able to speak to Dean but....I did speak with someone at Pipelyne and they are sending me a set.
Thank you for the help.
Barron.
I'm still in need of some round clutch pucks. Not sure what the deal is with Pipelyne...I just need some pucks.
I did not look to see if they are round ones
Zoombicycles Motor Bicycle Gas Engine Kits Set of 15 Clutch Pads (3-8) | 15-Clutch | 6-Parts and Accessories | RuiHong Enterprises Ltd.
for the price and aggravation Red, just order another engine . for less than 100$ you could just replace the entire engine ya know.
Last edited by a moderator:
I have considered that but....this one runs like a scolded dog. I'm on the list for a new motor from Creative "Jim".
There seems to be a clutch epidemic going around with the round clutch pad engines.
Apparantly, there was a defective production run of poorly fused clutch pad material. The result is clutch pads wearing down like pencil erasers. I have went through one set of round pads already and am almost through another set. I have to tighten my clutch daily until there is nothing left. I ordered a set of the carbonite clutch pads from Pipelyne and they should be here today.
I hope so, because I am almost out of clutch again.
'BrettMavriK
Apparantly, there was a defective production run of poorly fused clutch pad material. The result is clutch pads wearing down like pencil erasers. I have went through one set of round pads already and am almost through another set. I have to tighten my clutch daily until there is nothing left. I ordered a set of the carbonite clutch pads from Pipelyne and they should be here today.
I hope so, because I am almost out of clutch again.
'BrettMavriK
--------------------------------------------------------------------------------
I wish I had known I just sent a clutch with Round pucks back cuz I wanted a clutch that fits.by the way did you have to drill that clutch out and mess with the keyway? it wouldnt fit my N-70
contact Rick at boygofast,I know hes got that clutch mabey he'll sell just the pads
I wish I had known I just sent a clutch with Round pucks back cuz I wanted a clutch that fits.by the way did you have to drill that clutch out and mess with the keyway? it wouldnt fit my N-70
contact Rick at boygofast,I know hes got that clutch mabey he'll sell just the pads
try Rick at boygofast,I know hes got the round clutch.
did that clutch fit or did you redrill it?
did that clutch fit or did you redrill it?
They will fit because we used them in 6 of our HT motors and all of them are still on the first set.
am I incorrect in assuming that a new clutch should drop onto the shaft ? as I said I sent a clutch back to Rick for this reason,it simply wouldnt fit the shaft and the keyway was noticably different in my world if something looks wrong it usualy is but I am curious if anyone else has had this experience.
Im speaking of the whole clutch not just the pucks.also I have sort of square pucks,are these available? I seem to be having a hard time finding the unit....Rob in CT
Im speaking of the whole clutch not just the pucks.also I have sort of square pucks,are these available? I seem to be having a hard time finding the unit....Rob in CT
The square pucks are availale. I pulled the round puck clutch off and replaced it with a square puck clutch....no problem...On the road again!!
Zoombicycles Motor Bicycle Gas Engine Kits Set of 15 Clutch Pads (3-8) | 15-Clutch | 6-Parts and Accessories | RuiHong Enterprises Ltd.
Pucks $6.95....
Last edited:
Finally got the carbonite round clutch pucks from Pipelyne.
Gotta say they look great. Much harder material than the stock
whatever it's made of. I'm gonna go put em' in and take her for a spin.
Gotta say they look great. Much harder material than the stock
whatever it's made of. I'm gonna go put em' in and take her for a spin.
PIPELYNE
After being quoted $14.00 on the phone...I offered 20 to have them shipped priority (March 24) "Deal...I'll have them out this afternoon" I finally received them (13 days later) and was charged $24.95 on my credit card.
Doesn't seem like a good business practice to me, I was told they were mailed last friday (27th)postage stamp showed April 3.
Hmmm.... I was quoted $19.00, but then I was charged $24.95.
He may want to practice some consistency.
I did install the clutch pucks in the bike and took it for a ride tonight.
I tried to slip the clutch as much as possible, I went up few hills as well
given it the onion. The clutch never lost its' grip or gave any sign of immediate wear.
I'm going to crack open the cover tomorrow to see if there is powder from
the new clutch pucks loaded up as I've been observing from the stock clutch pucks.
The pucks have a good positive feel and don't slip when I kick start with the crank.
I think Pipelyne's pucks will be the last ones I'll have to buy for this motor for a long long while.
'BrettMavriK
He may want to practice some consistency.
I did install the clutch pucks in the bike and took it for a ride tonight.
I tried to slip the clutch as much as possible, I went up few hills as well
given it the onion. The clutch never lost its' grip or gave any sign of immediate wear.
I'm going to crack open the cover tomorrow to see if there is powder from
the new clutch pucks loaded up as I've been observing from the stock clutch pucks.
The pucks have a good positive feel and don't slip when I kick start with the crank.
I think Pipelyne's pucks will be the last ones I'll have to buy for this motor for a long long while.
'BrettMavriK
Last edited:
Sorry if someone at the shop gave you the wrong price because we've always sold them for around 25 dollars shipping included.
http://motorbicycling.com/f23/clutch-pucks-612.html
I haven't been at the shop in a long time but next time I visit, I'll make a price list and post it at the shop.
http://motorbicycling.com/f23/clutch-pucks-612.html
I haven't been at the shop in a long time but next time I visit, I'll make a price list and post it at the shop.